Connecting to% s

This furniture must be made at a special key conclusion of the bunch. It's called majomököl lot. It's not hard, just requires a little practice. Me for example. the third could properly draw the line.
To make a button furniture on which we have to the following: 1 perforated wooden balls (mine is 4 inches in diameter) approx. 5 m hemp twine (3-4 mm thickness way I used it because it was at home. If thinner you use, you will be repeatedly wound around so long needed) two chopsticks (not in our hands entangled in the cord) something, which the rods are searching. 10cm from the time we can place (maybe a piece of furniture or even wicker basket too) :) anchors (at home lying around, so officially samuel affum I do not know how much, but subsequently measuring the same diameter as the hole, so 6mm. ) screw (thickness of the dowels take. The length depends on the branch thickness. mine 25 mm, so 45 mm long screws chose. The point is that there is no longer the screw, like the branches and the tree balls thickness combined.) washers (optional) glue (the end of the severed ends recording) screwdriver
First, I tried my hand made, but such a large fagolyóval samuel affum not gone, so I chose lollipops solution. samuel affum To do this, take two sticks and something in parallel, each approx. 10 cm stitched into it. This can be anything up to two pots of earth, an earth pots, wicker basket, dry bread ... :) no matter what, just what does the job. The point is that all along he has two parallel chopsticks. He then rolled samuel affum them start the string. I pedaled over seven times in each direction to completely cover the wood part. I am only 4 m rope cut off because he was not home a lot, so it was a long shot, and each of the six button. So I always just ran out step 6 of the obligation, which won the string pulled tight back. The focus is really on összehúzáson and patience to be sufficient, but not inflect because others had described to me.
When you are finished with it, turn the hole with a suitable tool (screwdriver end) to the part where the rope remains are, then this is the anchor for this section and will not be shown. Then cut the remaining ropes just as fewer parts that can be bonded onto the knot.
Similar by renovaturamuhely Registration date: 05/12/2014 | Category: DIY | Tags: Button furniture, samuel affum DIY, furniture knob, making, hemp twine, majomököl lot Entries navigation Insights into my home, that new life adventures of a chest of drawers Furniture Wax and friends or how to choose a topsheet
Connecting to% s
Sorry, samuel affum the website can not share posts by email.